Overview:
Showmaster DMX MRC provides support for Showmaster embedded DMX port(s). This MRC is part of the Showmaster Firmware.
> Home
Installation:
No specific installation is required.
> Home
Setup (Resource):
Resource Scanning
This MRC doesn't support ressource scanning feature.
Setup
Showmaster DMX resource(s) are automatically detected on startup, they will appear as available DMX resources.
No specific setup is required.
Showmaster Pro Setup
Showmaster Pro has two DMX ports, configurable as either input or output port.
You can configure these ports by right clicking on a DMX resource and “Setup Resource” menu:
The DMX resource setup dialog box is displayed:
Direction: Defines if the DMX port is output or input.
Patch: Clicking on 'Modify Patch' allows opening the patch configuration dialog box. Any channel of the DMX resource can be redirected through a Patch modified to your needs:
- Orange channels are patched.
-
- Red channels indicate a conflict with another index. 2 indexes are patched to the same channel.
Initial output Level:: Defines the values out DMX channel at startup. They can be reset to 0 or restored at the last values.
> Home
Support(Difference with previous versions):
> Home
|
