Bug Fixed:

• Manager On Network device status stays on 'Limited Connection' in some cases.
• Retrieving a huge Database from a Showmaster can failed.

 Modified:

• Includes Showmaster Firmware 1.7.6

> Top

 Modified:

• Includes Showmaster Firmware 1.7.5

> Top

 Modified:

• Includes Showmaster Firmware 1.7.3

> Top

 Bug Fixed:

• Crash sometimes when switching from ST Model to Pro Model while not connected to a Showmater if resources are used by devices in the current project.
• MON Connections are not correctly redirected when the Showmaster Editor is connected to a Showmaster Pro with two active network interfaces.
• The EnumControl/GetCount command doesn't work.
• The IP Mask parameter of a Manager On Network is not properly saved.
• The scroll doesn't work when the timeline is in list view and blind mode.
• Showmaster Pro: it is possible to enter the same IP address for both Network Interface Cards.

> Top

 Modified:

• Includes Showmaster Firmware 1.7.1

> Top

 New Functionalities:

• Support of Showmaster iPro.

 Bug Fixed:

• Showmaster Editor can't open some ressources when loading a project while connected.

> Top

 Bug Fixed:

• Manager Panel clients don't reconnect when the Showmaster Editor is disconnected from a Showmaster.
• MxMs and MRCs are not activated after a fresh Showmaster Editor Installation.
• Convert menu doesn't export cue times.
• The Variable Selector dialog doesn't keep the last used Variable Type filters.
• There is no time information displayed when resizing or moving a track note.
• Time Position display (located at the upper left of the Task Editor) is not refreshed when nagivigating between several task tabs in the Task Editor.
• Countdown is not positracked properly when the timeline is in External Sync Mode.
• Crash when a variable is dragged and dropped over a Timeline Task in List Mode.
• The "GetIndexOfEnum" function always throws a "Syntax Error" message.

> Top

 Bug Fixed:

• Shared enum variables are not updated until the status changes from the server.

> Top

 New Functionalities:

• Support of Showmaster Pro MKII.

 Bug Fixed:

• Showmaster doesn't restart after incorrect network settings have been applied. Network settings are now checked before applying.

> Top

 Bug Fixed:

• Device Control / Activity / Enable or Disable throws Access Violation in Showmaster Editor / Showmaster Runtime.
• The command QuitShowmaster() is blocking in the editor when showmaster is not connected.
• Resources don't work sometimes in programming mode after a new project is created or sent to the Showmaster.
• Medialon On Network devices don't reconnect sometimes after a disconnection due to a network failure.
• Replace Device command is not active when multiple devices are selected.
• A memory leak appears when OpenCapAPI uses GetObject command.

> Top

 Bug Fixed:

• A variable selected as a parameter is only applied to the first cue when multiple cues are edited in the Inspector.
• Multiple Cues edition doesn't manage properly the different parameters with the same name if they're Enum and contain different values.
• Deleting a device when at least one of its variables is used in a task causes a crash.
• Project containing more than 1 Medialon On Network device cannot be reloaded.
• ESC key sometimes doesn't allow switching to Stop mode.
• The first connection to a Showmaster fails if Showmaster is not in the same subnet.
• Two editors trying to connect two Showmasters which are not in the same subnet can cause an IP address conflict.
• Launching an Editor by double-clicking on a project can display an error message if an other Medialon product such as Manager is already running.
• Re-installing the same Firmware version doesn't work properly.
• In some circumstances, a task paused by a Pause cue cannot be restarted.
• Showmaster Model is not updated for MON clients when the model is changed. Client browsers still see the same model.

> Top

 New Functionalities:

• Support for Showmaster ST, Showmaster Pro and Showmaster iPro models. The Editor allows switching between models to select the target one. New file extensions are available for Pro and iPro.
• 'Medialon On Network' policy has been changed. There is no more restrictions in the number of connections, except for the couples Panel/Manager Lite and Panel/Showmaster ST which are limited to 2 connections.
• 'Medialon On Network' device is now compatible with Showmaster ST, Showmaster Pro and Showmaster iPro models.
• 'Medialon On Network' Browser now displays the model on MONs found in the network.
• A MRC Help menu has been added.
• The resource scan mechanism and associated menus have been reworked. A new general scan dialog allows to scan all resources at a time.
• A 'Temporary' project is used when a new empty project is created or when a project is retrieved from Showmaster, allowing to perform all operations which require a project to be created (i.e. MXM memories creation).
• Showmaster connection can be aborted if the operation takes too long.
• Message indicating that some MXMs won't be working because there is no Showmaster connected has been improved. It now displays the list of MXM which won't work.
• The Showmaster connection status (in the status bar) is now highligthed when the connection is active.
• 'Current Date & Time' section of Showmaster 'Date & Time' Configuration as been reworked.
• The variables sort and display have been optimized.
• Update Firmware and Reset Factory have been improved.
• Multiple instances of the Editor on the same machine don't share the same data which make them really independent.
• A message dialog is displayed while the project is being prepared for sending.

 Bug Fixed:

• 'Test Command' button of Inspector is active although Showmaster Editor is in Stop mode. This causes that sometime, command doesn't work.
• Project name is not displayed in the Brower's Project node.
• Deleting a task selected on the Browser doesn't always delete the selected task.
• In some circumstances, 'Send Project' or 'Retreive Project' doesn't display an error message if the operation fails.
• 'Medialon On Network' task selection wizard doesn't work properly on a Showmaster being edited.
• Quiting the Editor may cause a crash after a new firmware has been installed.
• Switching quickly between 'Debug' mode and 'Stop' mode can cause Showmaster Editor to hang.
• Resources are displayed in red although Showmaster is not connected.
• Showmaster Editor main window maximized state is not saved.
• '-' key on the main keyboard is not properly handled on Qwerty keyboards.
• Garbage chars are sometime displayed on RecoveryTool.
• 'get digital' command doesn't work on RecoveryTool.
• 'event digital' command doesn't work on RecoveryTool.
• Some modal dialogs don't close when pressing ESC.
• In Timelines, moving vertical separator between Track names and Cues area all the way to left causes a crash.
• A crash can occur when the task setup is called from the context menu of the lister, for a task that is not currently edited in a Task Editor.
• When a Timeline time type is set to 1/1000fps, the task doesn't restart after a pause cue has been reached.
• Deleting multiple selected resources in the lister doesn't work. Only the the first selected one is deleted.

> Top

 New Functionalities:

• A connection password can be defined.
• Manager On Network target address doesn't need to be toggled from Showmaster to Showmaster Editor when Showmaster switches to 'Programming' mode (Manager/Manager Panel 5.0.3 required).
• A password management tab is added in Preference dialog box.
• The last connected Showmaster is kept selected in the Showmaster brower.
• Factory build number is added into the Showmaster Configuration dialog box.
• Complementary information have been added into the User'Manual.

 Bug Fixed:

• Tab key doesn't change active field in Property tab.
• INS (Insert) shortcut doesn't work as expected.
• 'Terminated' is used instead of 'Done' in progress dialog boxes which leads to think that something unexpected has occured.
• Some dialog boxes pops up behind the workspace.
• The project name is not updated when 'Save as' is done after retrieving a project.
• After a project has been retrieved, it is not possible to save it again.
• 'Local' term has been replaced by 'Virtual' to refer to virtual Showmaster.
• The 'Source' list, in log window, scrolls before the desired checkbox has been checked/unchecked.
• Some dialog boxes have wrong text color within Ice theme.
• Some sentences have been changed to make them clearer.
• Persistent variable values may be lost when a power loss occurs.
• Manager On Network Auto-reconnection doesn't work with 'Sense Net Device' option activated.
• In Manager On Network setup, if Specific Port number 4255 is entered, it is changed to 9255 when project enters Debug mode.
• If a TimeBased Task uses a device variable as its reference clock and the device is renamed, the TimeBased Task reverts to 'Internal' clock.
• TimeBased Task cues with time 00:00:00/00 or 00:00:00/01 are sometimes not executed when the TimeBased Task uses an external reference clock variable.
• TimeBased Task status buttons and sync LED are sometimes not updated.

> Top

 New Showmaster Editor

> Top