|
Medialon has been selected by ECA2 to be the main show control
system on “Mangrove Groove” aquatic show, a brand new stunning
38-minute multimedia show in OCTBAY, Shenzhen, China.
ECA2 - a French-based company specialized in creating and producing
major events and shows around the world - designed and produced
“Mangrove Groove” show, with the world’s largest aquatic stage ever
built which covers an area of 5,600sqm.
Every evening, up to 5,000 spectators can celebrate the return of
the birds in an amazing decor dedicated to the mangrove. The
artistic and technological challenges represent the forces of
nature, staging the four elements merged with the magic of
captivating images, with water, fire, lighting, video and air
effects, all entirely controlled and synchronized by a Medialon
Manager PRO Show Control system.
On “Mangrove Groove” show, Medialon Show Control system controls the
following devices and effects:
Water:
- 2x water screens with a 50-metre base,
- hundreds of water jets and custom moving jets.
Air:
- 5x geysers, compressed air to put sensitive equipment under
positive pressure.
Fire:
- 14x large flames via Medialon Artnet DMX MxM
Lighting:
- 1x grandMA2 console
- 600x underwater projectors
- 60x automatic projectors
Video:
- 5x Christie 35K and 2x Christie 20K projectors on lyre VIP via the
Medialon Christie projectors MxM
- 2x MODULO media players
- 1x Dataton Watchout 4 system displays
Audio:
- 1x multitrack Tascam X48 via LTC
- Internal audio player via the Medialon Local Media Player MxM
Laser:
- 5x laser projectors
Thanks to Medialon Manager Panel, free user interface design tool,
several Graphic User Interfaces (GUI) have been created. From a
single touch of a button, the AV Technical staff can run the show
(show mode), make video tests (test video mode), check the status of
the devices (status mode), etc.
The Status mode is the kind of tool which is very useful for
technical maintenance. Based on a custom user interface, it has been
especially designed to show the technicians the exact location of
each device. Access buttons allows to directly check the status of
all the AV devices as well as 8x temperature sensors, 1x wind sensor,
14x UPS (Uninterruptible Power Supply), pressure levels of water
effects pumps and compressors, video projectors lamp status, useful
lamp life span calculation and even more.
For a maximum reliability, 2x Medialon Manager units run
synchronously creating a full redundant system that switch
automatically at any time (an even during the show) from unit A to
unit B or from unit B to unit A if any unit failure is detected.
The Medialon Manager has also been programmed to retrieve log files
from devices located in different areas of the stage to helps show
technicians to immediately see if there is any issue with an AV
device during the show, and help them fix the machines very fast.
“Medialon Show Control system helps us to run, to synchronize and to
monitor hundreds of special effects. All of these devices interact
with more than 50 actors, acrobats and dancers, and it has proved to
be a safe and reliable tool to achieve our interpretation of the
life in the mangrove surrounded by an incredible amount of
mysterious and enchanting creatures”, declares Jean-Christope
Canizares ECA2’s CEO and Show Producer.
“During the last 30 years ECA2 has tested, installed and
commissioned lots and lots of Show Control systems and we even had
our own software called PILS that is still running satisfactory in
many shows all around the world, but when we decided to stop this
product and switch to a solution from the market we went naturally
to Medialon” concludes Guillaume Duflot ECA2”s COO and Technical
Director.
“Mangrove Groove” is a permanent show running daily since this
summer.
Credits:
Creation (overall) – Engineering – Production (Turnkey) Direction,
Production: J-C Canizares
Chief of Operations & Technical Director: Guillaume Duflot from ECA2
Screenplay, Artistic Coordination & Show Direction: Sophie Poirier
from ECA2
Multimedia Production & Show direction: Thierry Nutchey from ECA2
The Control system has been designed and engineered by ECA2,
installed by French Integrator Adrem, and programmed by Julien Ribes
from Artabase.
For further information, please visit:
www.octbay.com |
